PARAENT

본문 바로가기 주메뉴 바로가기 서브메뉴 바로가기

SMART Power Regulator

Nothing is smarter than SMART
  • SMART digital power regulator is next generation regulator adopting all technologies and know-how’s PARA-ENT has accumulated since its establishment of 2000.
  • Through MPD(Max Power Distribution) function, SMART power regulator can improve power factor and optimize efficiency of power by lowering peak power.
  • Designed to meet any customer’s requirements with ease and convenience.
카타로그 다운로드 메뉴얼 다운로드
Rated Voltage 110V / 220V / 380V / 440V
Allowance of voltage ±10% of rated voltage
Rated current 10A ~ 2500A
Frequency 50/60Hz (Auto selectable)
Minimum load 1A
Output range Phase-angle, Zero-crossing : 0~99.8 %
PCB power DC 24V
Power consumption Max. 15W (Without fan)
Input signal 4~20mA 3CH / 0~5V, 1~5V, 0~10V, 10K VOL (Select) 1CH
Digital input Switch Input 3CH
Digital output Relay Out 6CH (Alarm 3CH, Fan Control 3CH)
Control method Phase-Angle(Standard, current F/B, voltage F/B, power F/B)
and Zero-Crossing (MPD Function : Option), PZ mixed mode
Withstand voltage AC3KV (Step 1Min.)
Insulation resistance More than 10MΩ
Cooling Less than 55A : Natural cooling / More than 70A Cooling fan basically installed
Alarm Over Current, Over Temperature of heatsink(60℃, 80℃), Fuse failure, Load Failure, SCR failure Main power failure, FAN alarm, Partial load failure. Unbalanced load, Frequency noise alarm
Ambient Temp 0 ~ 40℃
Humidity 30% ~ 90% RH (No condensation )
SMC 32Bit CPU (12Bit ADC)
PM Output voltage / Output current : RMS value
PSD Color LCD , 18Key Pad (Detachable)
Communication RS-485 2 Wire half-duplex method, Max. 115,000bps Max. 32 SMC’s connectable, Protocol Modbus-RTU